CVE-2026-74677

net: usb: ipheth: fix carrier_work UAF on disconnect

N/A
Published: August 22, 2026 at 03:32 PM UTC
Updated: October 14, 2026 at 01:10 PM UTC
1 product affected across 1 vendorLinux Kernel

Using Linux by Linux?

Get instant alerts when new vulnerabilities affect Linux - before attackers find them.

Real-time alertsTrack your software stackFree plan available
Severity
N/A
Exploit prediction
EPSS 0.2%

Description

In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_check_work() dereferences freed memory. Tie the work to the interface state instead of chasing the completion: disable it in ipheth_close() and enable it in ipheth_open(), so a schedule_delayed_work() from the URB completion is a no-op whenever the interface is not up. disable_delayed_work_sync() also waits for a running instance, so it fully replaces the cancel_delayed_work_sync() it takes the place of. The work starts out disabled in ipheth_probe() so the enable/disable counts balance from the first open. Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and raw-gadget standing in for the device, driving the second path above (the interface is already down, so unregister_netdev() does not call ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in __run_timers(), freed by ipheth_disconnect() and re-armed from ipheth_sndbulk_callback() via queue_delayed_work_on(). The same trigger on a kernel differing only by this patch reports 0 of 15, and the carrier check still functions across open/close cycles. The reproducer needs an attached USB device that stops draining bulk OUT, plus a link down and unplug, driven as root. It is not a privilege boundary crossing and no exploit primitive was developed. Found by 0sec (https://0sec.ai).

Affected

Our own answer: ranges merged, affected separated from platform-only, with confidence and review flags.

4.14.116 ≤ v < 4.154.4.180 ≤ v < 4.54.9.173 ≤ v < 4.104.14.1164.154.4.1804.9.1734f2df9fd07698bece3321fbf9e4b6dbcb9babcccbb1b40c7cb863f0800a6410c7dcb86cf3f28d3b1ea7d6be58c2e6c1f426b48994bb22b2393c90963f5bca75dc46701f4c0d1dcbaae401233ae7ff06b
Vendor states this is fixed in 2c7496124e94c7f9c3daa5c5b1fb563ca9d62c45 (fixed)
Vendor states this is fixed in 48303f3ae0fa6e102f3fc7dbf1688cc179131962 (fixed)
Vendor states this is fixed in d07133fe1befae9a1e4c4c5e46ef0b73d2992020 (fixed)
Vendor states this is fixed in fde39b8a521780391fb4e5bda2c0aa4928947f12 (fixed)
Affected range stops below 4.10, so it looks safe — our inference, not a vendor statement
Vendor states this is fixed in 4.15 (unaffected)
Affected range stops below 4.5, so it looks safe — our inference, not a vendor statement
Vendor states this is fixed in 6.12.104 (unaffected)
Vendor states this is fixed in 6.18.45 (unaffected)
Vendor states this is fixed in 7.1.9 (unaffected)
Vendor states this is fixed in 7.2 (unaffected)

Remediation

No guide yet

No remediation guidance has been written for this CVE yet, and no fixed version or vendor advisory is recorded against it.

Quick Info

StatusRECEIVED

Get alerted

Stop reading CVE feeds looking for your own stack

Track the products you run and VulnTracker tells you when a new CVE affects them — with what is known about fixing it, and nothing about the rest.

Free plan, no card